Flow Measurements Questions and answer
Q & A For Flow Measurements
1.Convert the flow of 3 Cu ft/min into Cu meters/hour.
Solution
1 Cu ft/min = 1.699 Cu meters/hour
So, 3 Cu ft/min = 3 x 1.699 Cu meters/hour
= 5.097 Cu meters/hour
2 .Convert the flow of 9 Imp. Gallons into Barrels(oil).
Solution
1 Imp. Gallons = 0.0286 Barrels
So, 9 Imp. Gallons = 9 x 0.0286 Barrels
= 0.2574 Barrels
3.Convert the flow of 2 lb./sec into gm/min.
Solution
1lb./sec = 27220 gm/min
So, 2 lb./sec = 2 x 27220 gm/min
= 54440 gm/min
4. Convert the flow of 10 meter/sec into cm/sec.
Solution
1 meter/sec = 100 cm/sec
So, 10 meter/sec = 10 x 100 cm/sec
= 1000 cm/sec
5. Convert the flow of 18 ft/sec into meter/min.
Solution
1 ft/sec = 18.29 meter/min
So, 18 ft/sec = 18 x 18.29 meter/min
= 329.22 meter/min
6. Convert the flow of 57 ft/min into meter/sec.
Solution
1 ft/min = 0.005080 meter/sec
So, 57 ft/sec =57 x 0.005080 meter/sec
=0.28956 meter/sec
7. Convert the flow of 10 Imp. Gallons into Barrels.
Solution
1 Imp. Gallon = 0.0286 Barrels
So, 10 Imp. Gallons = 10 x 0.0286 Barrels
= 0.286 Barrels.
8. Convert the flow of 100 meter/sec into meter/min.
Solution
1 meter/sec = 60 meter/min
So, 100 meter/sec = 100 x 60 meter/min
= 6000 meter/min
9. Inferential method of measurement measures some related property and
then converts to flow rates. True/False?
True.
10. Oval gear type flow meter is a type of inferential flow meter. True/False?
False.
11. In case of orifice plate flow metering system, the flow rate is proportional to the square root of differential pressure. True / False?
True.
12. In PDO, flange tapping is the most commonly used type of orifice tapping. True/False?
True.
13. On the square root scale, the distance between each small division is decreasing as the readings go higher. True / False?
False.
14. Flow Nozzle is suitable for process applications involving slurries. True/False?
True.
15. The frequency output of a turbine flow meter varies linearly with the volumetric flow rate. True / False?
True.
16. Ultrasonic devices use high frequency sound waves or vibrations to detect the flow in a pipe line. True/False?
True.
17. Lobed-impeller flow meter is mainly used for liquids. True / False?
False.
18. The Coriolis flow meters can be used for both clean & viscous fluids.True/False?
True.
19. Paddle type flow switch can be mounted in vertical pipeline. True / False?
False.
20. Meter prover loop is used to calibrate the flow meter approved for custody transfer of crude oil for accuracy at regular intervals. True/False?
True.
21. Density of gas is more affected than liquids by varying pressure and temperature. True / False?
True.
22. Viscosity is the property that determines how freely fluid flows. True/False?
True.
23. What is density?
Solution
Density is defined as the mass per unit volume.
ρ = m/v
Where ρ = Density
m = Mass.
v = Volume
24. Turbulent flow is the most common type of flow pattern encountered in oil industry. True/False?
True.
Comments
Post a Comment