Multiple Choice Questions and Answers on industrial ethernet

Multiple Choice Questions and Answers on industrial ethernet

1. Magnitude of signal in Ethernet __________
a) Voltages swing between 0 and -2.05 volts on coaxial cables or between -2.5 V to +2.5 V on twisted pair.
b) Voltages swing between 2.00 and -2.00 volts on coaxial cables or between -1.5 V to +2.5 V on twisted pair.
c) Voltages swing between 0 and -2.05 volts on twisted pair or between -2.5 V to +2.5 V on coaxial cables.
d) all of the mentioned
Answer: Voltages swing between 0 and -2.05 volts on coaxial cables or between -2.5 V to +2.5 V on twisted pair.

2. connectors used in industrial Ethernet ____________
a) Screw type N connectors
b) D type connectors and DB- type connectors
c) RJ -45 and M12 connectors
d) all of the mentioned
Answer: all of the mentioned

3. Ethernet frame consists of ____________
a) MAC address
b) IP address
c) Default mask
d) Network address
Answer: MAC address

4. A point-to-point protocol over ethernet is a network protocol for __________
a) encapsulating PPP frames inside ethernet frames
b) encapsulating ehternet framse inside PPP frames
c) for security of ethernet frames
d) for security of PPP frames
Answer: encapsulating PPP frames inside ethernet frames

5. The maximum size of payload field in ethernet frame is __________
a) 1000 bytes
b) 1200 bytes
c) 1300 bytes
d) 1500 bytes
Answer: 1300 bytes

6. MAC address is of ___________
a) 24 bits
b) 36 bits
c) 42 bits
d) 48 bits
Answer: 48 bits

7. Ethernet in metropolitan area network (MAN) can be used as ___________
a) pure ethernet
b) ethernet over SDH
c) ethernet over MPLS
d) all of the mentioned
Answer: all of the mentioned

8. High speed ethernet works on _________
a) coaxial cable
b) twisted pair cable
c) optical fiber
d) unshielded twisted pair cable
Answer: optical fiber

9. An ethernet frame that is less than the IEEE 802.3 minimum length of 64 octets is called _______
a) short frame
b) runt frame
c) mini frame
d) man frame
Answer: runt frame

10. What is interframe gap?
a) idle time between frames
b) idle time between frame bits
c) idle time between packets
d) idle time between networks
Answer: idle time between frames

11. What is start frame delimeter (SFD) in ethernet frame?
a) 10101010
b) 10101011
c) 00000000
d) 11111111
Answer: 10101011

12. What is autonegotiation?
a) a procedure by which two connected devices choose common transmission parameters
b) a security algorithm
c) a routing algorithm
d) encryption algorithm
Answer: a procedure by which two connected devices choose common transmission parameters

Comments